From Wiki peoplefone (français)
Jump to: navigation, search



Configuration de base

  • Cliquez sur ajouter un provider.
  • Sélectionnez peoplefone dans la liste des providers.
  • Cliquez sur suivant.


Les paramètres de base sont définis par le profil. Cliquez sur Suivant.


Entrez le numéro de téléphone externe au format e164, avec le code de pays et l'indicatif régional exemple: 41215521111

Entrez le nom d'utilisateur et le mot de passe SIP de votre ligne principale.

Specify the amount of simultaneous calls, the number of simultaneous calls is unlimited with a peoplefone line as long as your internet bandwidth can handle it.

Note : You may need to purchase additional licenses for your PBX. Click Next


The next screenshot defines where the inbound call is to be routed, pick one of the destinations and click on Next.


Define an outbound route. The possibilities for an outbound route are listed in the screenshot below. Click on "Finish"


In the Registration settings, uncheck the STUN Server option, and check the Fixed IP option and specify the your fixed IP address. Note : for proper operation 3CX requires a fixed IP address, DynDNS is not supported.


Configuration du(s) numéro(s) DID/MSN

You can configure MSN/DID numbers with a peoplefone trunk, or an entire DID (number block).

When defining a DID, you can use the wildcard * as a placeholder

you can place it in the beginning of the number. And reference them, by 3 or 2 digits (representing an extension)

When defining an MSN, you need to specify the full number in e164 format, ie 4121552xxxx


To add the DID range, see the example below (with *30-*39) This will add the DID range

Screenshot3CXAddDIDRange.png Screenshot3CXDIDAdded.png

In the Trunk tree view, you can now see the individual DID numbers,


Define inbound routes

you're now ready to start defining inbound routes.

By clicking on the number, you can define where the incoming call should be routed.

In the two screenshots below, specify the DID/MSN number in the first text field, In the second field select the extension.

Screenshot3CXInboudRoute1.png Screenshot3CXInboundRoute2.png

Configuration avancée du CLIP

Contact the peoplefone support team (support@peoplefone.com), and ask us to open the CLIP for your line.

This section solves the problem, that happens when forwarding a call to an external device (Mobile, external terminal) the the number of the PBX is displayed instead of the number of the caller. this function must be adjusted in the 3CX.

These settings are set once per trunk and apply to all DID / MSN numbers.

  • Go to the peoplefone trunk on "parameter for outgoing connections"
  • Go to the SIP field content - SIP Remote Party ID field - Calling Party: User Part.
  • Change the value in the variable to "OriginatorCallerID" this will send the original caller

number will be sent. Note : Press the "Add / Update" otherwise the value is not accepted.

  • Now click on "Apply" and the settings will be active.


peoplefone 3CX HOSTED auf einem Blick!

peoplefone 3CX HOSTED ersetzt Ihre Telefonanlage und ist einfach online zu bedienen. Hier einige Ansichten: